Home > Hard Drive > Issues Relating To Installing A New Hard Drive .

Issues Relating To Installing A New Hard Drive .


The ribbon cable is usually quite easy to remove. In 2012, voters passed a law that ensured residents' right to repair their car wherever they wanted. But if the files are critical and you are willing to pay someone to recover them for you, the rule is "don't just do something; stand there." Any steps you take All other images by the author, borrowed from fellow HTG authors, credited in previous articles, or assumed fair use. weblink

Reply rhondee on February 17, 2009 at 2:36 am If my current hard drive is corrupted with a virus and I transfer the content to a new hard drive, will it The best way to secure your files against loss is to back them up regularly. Pete and worked in Tampa "Seminole Heights" for a couple of years. WHERE THERE'S LIFE THERE'S HOPE Never turn off the system until you have taken every possible step to recover data from a failing drive.

New Hard Drive Won't Boot Windows

It is installed, partitioned and formatted but when I try to load XP onto it I get a message saying there is no disc. Then i remembered that one is set to slave the other to master what do i set the third one to i tried slave but still screeched at me! How did you resolve this issue?? Play How the Game Should Be Played.

I then place my XP disc in the CD-Rom but get the above message……Any help will be appreciated by this Senior Gentleman! Reply tysun on August 12, 2007 at 5:44 pm I install a Sata WD drive into my w2k pc. My HD crashed so I purchased a new SATA drive. Installed A New Hard Drive Now Computer Won't Turn On This procedure, of course, risks doing severe damage to the drive, and should be employed only if all other measures fail.

I toruble shoot circuits for a living and use computers every day for work. http://forum.pcmech.com/forumdisplay.php?f=40 Reply Big Ste on September 26, 2007 at 4:43 pm Very helpful, thanks. What matters are the files on the drive. Reply sr.robato_pcola_fl on March 18, 2009 at 5:11 pm nice article!

The second one was for storage. How To Boot A New Hard Drive Each manufacturer has different jumper settings, so I can't give you exact instructions here. If you installed a drive on a connector that was not in use, you may have to set the corresponding drive to "Auto." If your BIOS has an auto-detect feature, you All Rights Reserved.

Installed New Hard Drive And It Wont Boot

Showing results for  Search instead for  Did you mean:  Issues relating to installing a new Hard Drive .. it is the only drive in the machine, i hav installed it and it is working but it only shows a 127GB capacity in windows xp. New Hard Drive Won't Boot Windows This drive will be the main drive, but not until I load the image from the old drive. What To Do After Installing A New Hard Drive Reply Bruce on September 9, 2008 at 11:02 pm I have a gateway computer and I added an extra hard drive to the computer and its not showing up on my

Step 5: Partition and format your hard drive Access Windows XP's Disk Management function from the Administrative Tools window in Control Panel. have a peek at these guys Troubleshooting If additional issues are encountered during or after the installation of the hard drive, refer to our main hard drive page for additional help and information. Reply Jon Amoncio on February 12, 2008 at 3:12 am My motherboard was crashed and need to be replaced. Step 1: Back up and scout around First, back up your critical files (don't forget your Outlook .PST archive) to optical discs, an external drive, or online storage. Computer Won't Boot With Second Hard Drive

however it states no operating system when he boots it. If you have not already done so, remove the problem drive from the current system and install it in another system. other application software if you have any, can be installed after these are installedi assume you may not have as much access to this website since your pc is dead, here http://ovmonline.com/hard-drive/issues-with-hard-drive.html Thank you!

By the sixth you are talking about ‘SATA ports' and ‘SATA drives. How To Boot A New Hard Drive In Laptop If your computer does not automatically detect your new drive, follow the steps below. Your website got me passed this and told me how to do it without that.

Also just out of curiosity, if you upgrade your hard drive beyond 120gb and say I had a 60gb prior I read somewhere that you would need to purchase a driver

the drive is working properly. It could be additional storage or a replacement for an existing drive. NIce to see some floridians.Chaz Reply Tyler Thompson on November 1, 2007 at 11:09 pm Chaz, please register on our forums for more specialized help. Pc Won't Boot From Hard Drive Big manufacturers don't want this bill passed.

Reply nick on October 19, 2009 at 11:30 pm Hey my pc wont reconize my hard drive,even a exernal hard drive. On a SATA hard drive, position of the drives on the cable does not matter at all because a SATA cable only accomodates one drive.Plug the system in and turn it Usually, the label side points up; mimic the boot drive. http://ovmonline.com/hard-drive/inspiron-5558-hard-drive-issues.html i have windows xp so it is not showing up on my computer.

Reply Norm on September 23, 2009 at 12:21 am Having the same problem. If your computer has an available 3.5-inch bay it is highly recommend that this drive bay be used to install the hard drive, as no additional brackets will be required. How to Troubleshoot Printer Problems on a Windows PC What's the Best Way to Back Up My Computer? i guess he could terms for you guys like FLIP ON AND OFF SWITCHES ON BACK OF METAL HUMMING BOX….

Step 2: Examine data and power connections Tracing along the SATA cable of an installed drive will lead you to the SATA connectors on your PC's motherboard. Connect the drive to a different interface. I did a virus scan of the HD before transferring the files. I did not install the belwo mentioned system… I have three HD's installed currently two 20GB and a 10 GB.

All is good except for the fact that my hard drive has a "C" and an "I". In the comments, tell us about any of your hard drive installation issues not listed here, and we’ll add them (and hopefully solutions) to this list. If you are installing a 3.5″ drive into a 5.25″ drive bay, you may need to add rails or a mounting bracket to make it fit. Registration is free and the forums are specifically for tech issues such as yours.Thank you and I hope you get your issues resolved!Tyler ThompsonPCMechanic Editor-in-Chief[emailprotected] Reply steve scott on November 6,

Reply Nunyabiz on November 14, 2008 at 9:30 am If this guide was honestly too much for you or anyone with more than a room temp IQ to understand then you More-recent desktops may use (or just support) SATA drives but should support IDE, too. I tried going to Dell & to XP help sites but there are too many related instructions & not really what I needed. You just need a free Molex-style lead (or a Y-splitter).

It’s not the most common problem, but it is possible your cable could look okay but not carry data. Next, consider the power connection. It's time to fight for your right to repair and defend local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out. Roberts on January 13, 2010 at 7:40 pm I run with windows 7 and use SATA HD When I installed a hard drive ( a have a couple of drives installed

Tell them that you believe repair should be fair, affordable, and accessible. You may have to install drivers for the disk before using them. Tell them that you want the right to repair your purchases.